Mounting Cameras
on the wall or upside-down
Mounting method for BKWIFICAM1/SPWIFICAM: Use the included wall anchors and screws to attach the mounting plate to the wall where you would like the camera to be. (Wall actors only need to be used it mounting in concrete or brick or if you want it to be extra secure in drywall) Screw in screw nut into bottom of camera. Then slide the camera onto the mounting plate with the screw nut. You may need to tighten screw nut if the camera feels loose on the mounting plate. Once camera is mounted you will need to open up the camera in the app and move the lens to be a the desired angle using the tilt and pan controls. If the video is upside down, go into camera settings at the top right corner of the main camera screen and select "Basic Function Settings" and turn on "Flip Screen".
Mounting method for BKWIFICAM2: Use the included wall anchors and screws to attach the mounting plate to the wall. (Wall actors only need to be used it mounting in concrete or brick or if you want it to be extra secure in drywall) Line up the notches on the mounting plate with the grooves on the bottom of the camera. Then slide the camera onto the mounting plate and turn until secure. Once camera is mounted you will need to open up the camera in the app and move the lens to be a the desired angle using the tilt and pan controls. If the video is upside down, go into camera settings at the top right corner of the main camera screen and select "Basic Function Settings" and turn on "Flip Screen".
Mounting method for BKWIFICAM4/SPWIFICAM4: On the bottom of the base of the camera you will find two holes with notches next to them. Place two screws into the wall where you would like to mount the camera and make sure they are spaced the same width as the holes on the bottom of the base. Then line up the notches on the camera base with the screws in the wall. Then slide the camera onto the screws and turn until secure. If the camera is still loose, you may need to tighten the screws in the wall.
All of the Cameras can be mounted on either the wall or ceiling. As mentioned above, if the camera is upside down you will need to go into settings and turn on "Flip Screen" so the video is right side up.
Wall Mounted
Ceiling Mounted